Lexicon RV Receiver manual DIG Audio, Anlg Audio, DIG/ANLG Auto, Mode Family

RV-5 Setup

DIG AUDIO

SETUP INPUT SETUP DIG AUDIO

Selects the DIG AUDIO parameter, which assigns one of the rear panel digital audio input connectors to the current input. Available selections include NONE, Optical 1-4, Coaxial 1-4, and HDMI 1-2.

The HDMI Audio & Video inputs, HDMI 1 & HDMI 2, are mutually exclusive inputs - only one input is available at a time for each input location. For example, while setting up the DVD input, if HDMI 2 is selected for the Video Input, then HDMI 1 is not a selectable option for the Digital Audio Input.

Note: Digital Audio is not selectable for the Tuner, PC, and Dock inputs.

Refer to Section 5: Tuner, PC, & Dock Controls for more information.

ANLG AUDIO

SETUP INPUT SETUP ANLG AUDIO

Selects the ANLG AUDIO parameter, which assigns one of the rear panel analog audio input connectors to the current input. Available selections include NONE, Analog 1-6, 7.1 Analog, and 5.1 Analog.

Note: Analog audio is not selectable for the Tuner, Dock, and PC inputs.

Refer to Section 5: Tuner, PC, & Dock Controls for more information.

DIG/ANLG AUTO			OFF, ON
SETUP	INPUT SETUP	DIG/ANLG AUTO

Selects the DIG/ANLG AUTO parameter, which identifies if the RV-5 should switch to an analog signal source for an input where the digital input source has been interrupted. This feature is particularly useful with certain cable set-top boxes where the signal is normally digital but occasionally changes to analog.

The parameter, when set to ON, identifies if there is both a digital and analog signal present to the input. If this condition is true, then the RV-5 prioritizes the digital signal over the analog signal. When the digital signal is interrupted, then it switches to the analog signal.

Note: Digital/analog auto switching is not selectable for the Tuner, Dock,

and PC inputs. Refer to Section 5: Tuner, PC, & Dock Controls for more information.

MODE FAMILY		LOGIC 7, DOLBY, DTS, DSP, STEREO
SETUP	INPUT SETUP	MODE FAMILY

Identifies the Surround Mode Family that is initially applied to the incoming audio streams for the currently selected input. Other surround mode families may still be applied. For more information, refer to the “Listening Modes” section found later in this chapter.

Note: The Mode Family and Modes are connected. The Modes are driven by the Mode Family selection as well as by the incoming audio source. The current running data stream dictates what Mode Family options are available for selection.

MODE

SETUP INPUT SETUP MODE

Identifies the Listening Mode that is initially applied to the incoming audio streams for the currently selected Mode Family. Other listening modes may still be applied. For more information, refer to the “Listening Modes” section found later in this chapter.

Note: The Mode Family and Modes are connected. The Modes are driven by the Mode Family selection as well as by the incoming audio source. The current running data stream dictates what Mode Family options are available for selection.

3-17