Lexicon RV Receiver manual Dock Functionality, Connecting the Dock to the RV-5

Tuner, PC, & Dock Controls Lexicon

DOCK FUNCTIONALITY

The optional D-1 iPod Docking Station allows you to enter a new world of listening enjoyment made possible by combining the storage capacity and playback flexibility of an iPod® (not included) with the sonic power of your RV-5 Receiver. Operation is easy, you can use your RV-5 remote control or the front panel buttons to access and control your iPod selections. Just one simple connection and you’re ready to go!

Note: This functionality is ONLY available if you have purchased the optional

D-1 iPod Docking Station. Refer to Section 1: Getting Started for ordering details.

CONNECTING THE DOCK TO THE RV-5

Before connecting the Dock, turn the RV-5 off using either the main power switch or the Standby button.

With the RV-5 off, press the button on each side of the connector at the end of the Dock cable and insert this plug into the DOCK connector on the rear panel of the RV-5. The connector is keyed to only connect in one way. If you inadvertently try to plug the connector in the wrong way, do not force it. Simply invert the connector and try again.

Press buttons when inserting or removing the plug.

Once the DOCK connector is attached to the D-1 Dock accessory, select the DOCK input. The RV-5 front panel 2-line front panel display indicates that the input is “UNPLUGGED...”. The status remains as “UNPLUGGED” until an iPod is actually docked.

Note: The DOCK Input setup displays Digital Audio as NONE, Analog Audio as DOCK (or “UNPLUGGED” if there is no iPod connected to the RV-5), and the Dig/Anlg Auto parameter is dashed out. These three parameters cannot be changed for the DOCK Input.

When the iPod is initially plugged into the RV-5, the iPod goes to the top of its music menu. When the iPod is removed, the iPod menu goes to the root menu.

If the RV-5 is in Standby mode with the DOCK AUTO POWER parameter set to ON and the iPod currently playing a track when it is plugged into the Dock, the track will continue to play and the 2-line front panel display will show the current track information.

SELECTING THE CORRECT iPOD INSERT

Each iPod model is a slightly different size, making it necessary to use an insert that matches your specific iPod to the Dock. The Dock is shipped with the insert for the color screen and photo models already installed; if you own one of those models, no further changes are necessary.

If you own a different iPod, first select the insert that matches your model. The model identification is printed on the back of each of the four extra inserts supplied with the Dock.

Note: The iPod Shuffle is not supported by the optional D-1 iPod Docking Station.

5-6