Lexicon RV Receiver manual Amplifier Overview

Basic Operation Lexicon

19 DOCK CONNECTOR

Provides an interface for an iPod, which can then be accessed through the RV-5. To use this feature, the D-1 Dock option must be installed to the rear panel DOCK connector. With a compatible iPod connected to the RV-5, selecting the DOCK input allows you to play audio files from the iPod. You can view and navigate through the iPod menus using the RV-5 remote control or front panel controls.

For more information on the Dock option and how to use your RV-5 with an iPod, refer to Section 5: Tuner, PC, & Dock Controls.

20 PREAMPLIFIER OUTPUTS

Provide output for external power amplifiers for applications that require them.

21 TUNER ANTENNA CONNECTORS

Provide two antenna connections for the AM/FM radio tuner. The RV-5 accessories include two antennas, one for AM stations and one for FM stations.

For information on how to use the AM/FM radio tuner, refer to Section 5: Tuner, Dock, & PC Controls.

AMPLIFIER OVERVIEW

The RV-5 features a high-current 7-channel power amplifier with 85W per channel. Gold-plated binding posts are provided for speaker connections.

MAKING CONNECTIONS WITH THE AMPLIFIER OUTPUT

Use bare speaker wire with the amplifier output connectors. To install, loosen the connector, insert the wire into the bottom of the receptacle, then tighten the connector.

Use up to 10-gauge speaker cable to ensure low-impedance connections between the amplifier and the speakers. Observe correct speaker polarity.

CAUTION!

Do not connect the outputs of one channel to the outputs of other channels or to other amplifiers. Do not over-tighten speaker connectors as they can break and will then require that the RV-5 be serviced.

UTILIZING SPARE CHANNELS

While the amplifier can support a 7.1-channel system, it is equally suitable for use with 5.1-channel systems. Since 5.1-channel systems do not use all of the speaker outputs, the “spare” amplifier outputs can be used for Zone 2 operation.

For example, if the RV-5 Receiver is used to run a 5.1-channel system in the main listening area, then the two rear speaker outputs can be used as Zone 2 left and right speakers in a second listening location, without the cost of an additional power amplifier.

2-8