Lexicon RV Receiver manual Setup

Setup Lexicon

SETUP

Selecting SETUP from the MAIN MENU opens the SETUP menu.

MAIN MENU

AUDIO CONTROLS VIDEO STATUS

SETUP

SETUP

DISPLAY SETUP SPEAKER/EQ SETUP INPUT SETUP SURROUND CONFIG DOLBY CONFIG MUTE LEVELS POWER ON SETTINGS

SURROUND CONFIGURATION

SETUP SURROUND CONFIG

Opens the SURROUND CONFIG menu, which is used to customize the listening modes that are available for the currently selected input. See the “Surround Configuration” section found later in this chapter for more information.

DOLBY CONFIGURATION

SETUP DOLBY CONFIG

DISPLAY SETUP

SETUP DISPLAY SETUP

Opens the DISPLAY SETUP menu, which is used to customize the OSD and front panel display, as well as other display-related parameters. See the “Display Setup” section on the following page for more information.

SPEAKER/EQ SETUP

SETUP SPEAKER/EQ SETUP

Opens the SPEAKER/EQ SETUP menu, which is used to configure the Main Zone and Zone 2 audio output connectors for the desired speaker setup, set speaker cross-overs, and calibrate distances and output levels. See the “Speaker/EQ Setup” section found later in this chapter for more information.

INPUT SETUP

SETUP INPUT SETUP

Opens the INPUT SETUP menu, which is used to change input names, assign audio and video input connectors, select preferred listening modes and configure Main Zone and Zone 2 settings. See the “Input Setup” section found later in this chapter for more information.

Opens the DOLBY CONFIG menu, which is used to customize the Dolby listening modes to your personal preferences. See the“Dolby Configuration” section found later in this chapter for more information.

MUTE LEVELS

SETUP MUTE LEVELS

Opens the MUTE LEVELS menu, which is used to set the mute level controls. See the “Mute Levels” section found later in this chapter for more information.

POWER ON SETTINGS

SETUP POWER ON SETTINGS

Opens the POWER ON SETTINGS menu, which is used to configure the power on volume level and the Dock auto power feature. See the “Power On Settings” section found later in this chapter for more information.

Note: When a source is active, changing some audio or video parameters may cause the Main Zone audio to briefly mute the incoming source. If Zone 2 is set to DOWN MIX, the Zone 2 audio will also briefly mute.

3-2