Panasonic SC-BTT405, SC-BTT465 Bluetooth operations, One-Touch Connection Connecting by NFC

Bluetooth® operations

By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® device wirelessly.

Refer to the operating instructions of the Bluetooth® device for details.

≥If you intend to use an NFC (Near Field Communication)-compatible Bluetooth® device, proceed to “One-Touch Connection (Connecting by NFC)”.

1 Turn on the Bluetooth® feature of the device.

2 Press [].

≥If “Panasonic BTT” is displayed on the Bluetooth® menu of the device, go to step 4.

3 Press and hold [jPAIRING].

≥“PAIrInG” will be displayed on the unit’s display and the unit will enter pairing standby mode.

PAIRING

≥If another Bluetooth® device is already connected, the connection will be terminated automatically.

4 Select “Panasonic BTT” from the Bluetooth® menu of the device.

≥If another Bluetooth® device is already connected, disconnect it.

≥“ConnECtEd” will be displayed on the unit’s display and the connection will be established.

CONNECTED

5 Start play on the Bluetooth® device.

20 VQT5F61

≥If prompted for the passkey, input “0000”.

≥You can register up to 8 devices with this system. If a 9th device is paired, one of the other registered devices will be replaced.

≥This system can only be connected to one device at a time.

≥When “Bluetooth” is selected as the source, this system will automatically try and connect to the last connected Bluetooth® device. If the connection attempt fails, try to establish a connection again.

≥If you switch the source, the Bluetooth® device will be disconnected.

≥If the image and sound are out of sync during playback, restart the playback application you are using. If the problem persists, connect the Bluetooth® device and this unit with an audio cable.

≥“Bluetooth Standby Mode” (> 30)

One-Touch Connection (Connecting by NFC)

For NFC-compatible AndroidTM devices only (AndroidTM version 4.1 or higher)

Simply by touching an NFC-compatible Bluetooth® device on the unit, you can complete all preparations, from registering a Bluetooth® device to establishing a connection.

1 Turn on the NFC feature of the device.

2 Touch and hold your device on the NFC touch area of this unit. (> 10)

≥If the unit is in standby, it will turn on, and “nFC” will be displayed on the unit’s display. Keep the device in contact with the unit.

≥When the Bluetooth® device is paired and connected, “ConnECtEd” is displayed on the unit’s display. Once the registration and connection of the Bluetooth® device is complete, move the device away from the unit.

≥If “ConnECtEd” is not displayed, change the touching position.

3 Start play on the Bluetooth® device.

≥When the connection is established, the playback may start automatically depending on the type of device being used.

≥The One-Touch Connection may not work properly depending on the type of device being used.