32 VQT5F61
Speaker installation option
Consult a qualified building contractor when
attaching the speakers to a wall. Improper
attachment may result in damage to the wall and
speakers and personal injury.
You can attach all of the speakers (except
subwoofer) to a wall.
≥The wall or pillar on which the speakers are to
be attached should be capable of supporting
10kg per screw.
1Drive a screw (not supplied) into the wall.
AAt least 30mm
B‰ 4.0mm
C‰ 7.0mm to
‰ 9.4mm
DWall or pillar
E5.5mm to 7.5 mm
2Fit the speaker securely onto the screw(s)
with the hole(s).
Use the measurements indicated below.
≥Leave at least 20mm of space above the
speaker and 10mm on each side to allow
enough space for fitting the speaker.
[BTT785] [BTT465] [BTT405] CENTER
A14mm
B65mm
C175mm
[BTT433] CENTER
D18mm
E73mm
F135mm
[BTT785] FRONT, SURROUND
[BTT465] FRONT
Attach to a wall without the base and the stand.
≥Before using the speaker cable, remove it from
the stand by pulling it out.
G45mm
H53mm
I266mm
≥Reattaching the speaker cable to the stand

Attaching to a wall

e.g., [BTT465] [BTT405] Surround speaker
DO NOT DO
≥In this position, the
speaker will likely fall if
moved to the left or right.
≥Move the speaker so
that the screw is in this
position.
Screwing positions on the
wall
Straighten the cable and run through the stand.
Pull out the cable through the hole.
160mm
SC-BTT785&465&433&405GNGSGA-VQT5F61_mst.book 32 ページ ２０１４年２月２７日　木曜日　午前１１時２７分