USFM 100 Installation Guide, cont'd
6.Complete the Installation
a.Switch on the display device, control device, and signal sources, and configure the system. Adjust the position and length of the boom arm as needed, adjusting the UPB 25 to center the image. When fully satisfied, secure the arm and tighten down all the UPB 25 locking screws.
b.Place the covers over the installed plate and boom arm, and secure with supplied screws.
Extron
USFM 100
Optional Accessory
UPB 25
Universal Projector Mounting Bracket
RGB LEVEL PEAKING | MTPSE |
Plastic Enclosure Cover
(4)
Figure 8. Attach Covers and Secure
For full configuration and setup details, see the PoleVault System Installation Manual, the MLC 104 Plus Series Reference Manual, and the PVS 305SA User Manual, all available online at www.extron.com.
General Specifications
Mounting |
|
Wall mount | Yes, with included hardware |
Maximum load capacity | 20 lbs (9.1 kg) projector weight (does not include UPB 25) |
Material | Steel (structural parts), plastic (covers), aluminum (boom arm covers) |
Dimensions (see page 7 for images) |
|
Base plate | 11.1" H x 34.4" W x 2.2" D (28.3 cm H x 87.4 cm W x 5.6 cm D) |
Base plate with cover | 12.9" H x 36.3" W x 2.7" D (32.9 cm H x 92.2 cm W x 7.0 cm D |
Boom arm | 12.5" H x 3.6" W x 21.7 - 31.8" D (31.9 cm H x 9.1 cm W x 55.0 - 80.8 cm D) |
Boom extension range | 17.5" (44.4 cm) |
Product weight | 17 lbs (7.7 kg) |
Shipping weight | 25 lbs (12 kg) |
Vibration | ISTA 1A in carton (International Safe Transit Association) |
NOTE: Weights exclude the UPB 25.
Regulatory compliance |
|
Safety | |
Warranty | 3 years parts and labor |
NOTE: Specifications are subject to change without notice.
6
