Panasonic SC-BTT433 TV screen turns black, Unit switches to standby mode, 3D video is not output

The TV screen turns black.

¾When “24p Output” is set to “On”, HDMI authentication takes place and a black screen is displayed.

This unit does not recognize the USB connection correctly.

¾Disconnect and re-connect the USB cable. If it still does not recognize the connection, turn this unit off and on again.

¾USB devices may not be recognized by this unit when connected using the following : ja USB hub

ja USB extension cable other than the supplied with the Wireless LAN Adaptor DY-WL5 (optional)

¾If you connect USB HDD to this unit, use the USB cable that is supplied with the HDD.

The unit switches to standby mode.

¾This unit will automatically turn to standby mode after 20 minutes if it is inactive. (> 15)

¾When the time set for the sleep timer has passed, the main unit will be turned off. (> 9)

¾One of the unit’s safety devices is activated. Press [Í/I] on the main unit to turn the unit on.

Picture

The images from this unit do not appear on the TV.

Picture is distorted. Jittering occurs.

¾An incorrect resolution is selected in “HDMI

Video Format”. Reset the setting as follows:

1Turn the unit on.

2Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds. j“00rEt” is displayed on the unit’s display.

3Press [1] (right) repeatedly on the remote control until “04PrG” is displayed on the unit’s display.

4Press and hold [OK] for at least 5 seconds. Set the item again. (> 26)

jWhen Dolby Digital Plus, Dolby TrueHD, and DTS-HD®audio are not output properly, select “Yes” in “Default Settings” (> 31) and

make proper settings.

¾The unit and TV are using different video systems.

1Turn the unit on.

2Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

j“00rEt” is displayed on the unit’s display.

3 Press [1] (right) repeatedly on the remote control until “05Pln” is displayed on the unit’s display.

4 Press and hold [OK] for at least 5 seconds. The system switches from PAL to NTSC or vice versa.

¾PAL discs cannot be correctly viewed on an

NTSC TV.

¾When “3D BD-Video Playback” in the Setup menu is set to “Automatic”, images may not be output depending on the connection method. After removing the disc from this unit, select “Set before play” in the Setup menu, and select “2D Playback” in the setup screen displayed when playing 3D discs. (> 27)

¾If irregular colouring occurs on your TV, turn the TV off for about 30 minutes.

If it persists, move the speakers further away from the TV.

Video is not output in high-definition.

¾Confirm that “HDMI Video Format” in the Setup menu is set properly. (> 26)

3D video is not output.

¾Connect to a full high-definition TV.

¾Are the settings on this unit and the TV correct? (> 18)

¾Depending on the connected TV, the video being played back might switch to 2D video due to changes in resolution etc. Check the 3D setting on the TV.

¾Check that proper HDMI video input is selected on the TV.

3D video is not output correctly as 2D.

¾Select “Set before play” in the Setup menu, and select “2D Playback” in the setup screen displayed when playing 3D discs. (> 27, “3D BD-Video Playback”)

¾Discs that have recorded titles with Side by side (2 screen structure) and that can be enjoyed in 3D are played back in accordance with the settings of the TV.

A black band is displayed around the edge of the screen.

The aspect ratio of the screen is abnormal.

¾Confirm the “TV Aspect” is set properly. (> 29)

¾Adjust the aspect setting on the TV.

Reference

VQT5F61 35