Smeg F610 Front panel and commands, 2.2Description of commands, Function Switch Knob, Timer Knob

Front panel and commands

2.2Description of commands

FUNCTION SWITCH KNOB

Selects the desired cooking functions. The symbols are shown below.

Turning the knob the various function symbols light up, simultaneous with the timer and internal oven light indicators.

NO FUNCTION SET	GRILL ELEMENT
UPPER AND LOWER	UPPER AND LOWER HEATING
HEATING ELEMENT	ELEMENT + VENTILATION
	WIDE GRILL ELEMENT +
LOWER HEATING ELEMENT	VENTILATION
WIDE GRILL ELEMENT	GRILL ELEMENT + VENTILATION
LOWER HEATING ELEMENT +
VENTILATION	DEFROSTING
UPPER AND LOWER HEATING	VENTILATED HEATING ELEMENT +
ELEMENT + VENTILATED	VENTILATION
HEATING ELEMENT

THERMOSTAT KNOB

Selection of cooking temperature.

Turn the knob clockwise to the required temperature, between 50° and 250°C. The temperature light indicates that the oven in is heating- up phase.

When this light goes out, the preset heating temperature has been reached.

The light will come on periodically during use to indicate that the oven is being kept at the set temperature by a thermostat.

TIMER KNOB

Lets you choose manual cooking or the timer with automatic turn-off of the oven when done.

For manual control of cooking time, turn the knob anticlockwise to the symbol .

To set cooking time turn the knob clockwise. The numbers from 10 to 120 correspond to minutes. Adjustment is progressive and intermediate positions between the numbers shown may be used.

At the end of programmed cooking an intermittent sound signal is emitted. This can be de-activated by turning the function selector knob to the position.

20