Apple Installing the Replacement Bluetooth Cable, Remove cable from computer, 073-1256 Rev. A

Models: Bluetooth Cable

1 5

Page 4

6Disconnect cable from Bluetooth card and backplane board.

Replacement

Bluetooth Cable

2Holding processor tray by latches, lower it back into computer.

3Make sure latches are closed flush with front of processor tray.

073-1256 Rev. A 4

Image 4

Contents

First Steps Opening the ComputerBluetooth Cable Replacement Instructions1 Locate processor tray Removing the Installed Bluetooth Cable073-1256 Rev. A 4 Place tray DIMM side up on soft, clean cloth 5 Locate Bluetooth cable3 Holding tray by latches, lift it out of computer 2009 Apple Inc. All rights reservedInstalling the Replacement Bluetooth Cable 1 Connect cable to Bluetooth card and backplane board7 Remove cable from computer 073-1256 Rev. A Closing the Computer 1 Replace access panel