Lexicon RV Receiver manual To control the iPod in Zone 2 via the remote control

RV-5 Tuner, PC, & Dock Controls

•AUTO/MAN mimics the MENU button on the iPod. The MENU button backs out of the menu structure, one level at a time, each time it is pressed.

•SAVE mimics the SELECT button on the iPod. The SELECT button acts as a play button at the song level. The select button drills deeper into the menu structure, one level at a time, each time it’s pressed.

• ST/MON and FM/AM both mimic the Play/Pause ( ) control of the iPod. If the playlist is not active, pressing this option starts the playlist. If the playlist is already playing, then pressing this option pauses it.

CHARGING THE iPOD

You may leave your iPod in the Dock even when you are not using it as a playback source. Whenever the iPod is docked and the RV-5 is turned on, the Dock will charge the battery in the iPod.

REMOVING THE iPOD

To remove the iPod from the Dock, grasp the sides of the iPod and pull it straight up, away from the Dock.

ZONE 2 iPOD CONTROLS

The RV-5 Receiver allows the DOCK input, and attached iPod, to be accessed and output to either the Main Zone or the Zone 2 location. However, for the DOCK inputs, the OSD and front panel display reflect ONLY the Main Zone activity. Therefore, if the iPod is accessed in Zone 2, there is no visible indication on the RV-5 that a change has been made.

To control the iPod in Zone 2 via the remote control:

1.From the “Zone 2” menu layer, select the DOCK input (number pad key 8).

2.Page 1 of the “Zone 2” menu layer touch screen provides the iPod controls.

To control the iPod in Zone 2 via the front panel Tuner:

1.Select the DOCK input in the Main Zone.

2.Activate the Main Zone OFF button so that the LED lights red. The Main Zone is now off.

Note: Do NOT change the Main Zone input before pressing the OFF button. The Main Zone MUST be turned off with the DOCK input selected.

3.Select the DOCK input in Zone 2.

4.The front panel buttons under the TUNER heading now control the iPod in Zone 2.

5-9