Lexicon RV Receiver manual Menu Time OUT, Brightness, NONE, 30, 40, 50, 60 Seconds

Setup Lexicon

MENU TIME OUT		NONE, 30, 40, 50, 60 SECONDS
SETUP	DISPLAY SETUP	ON-SCREEN DISPLAY	MENU TIME OUT

Selects the MENU TIME OUT parameter from the On-Screen Display (OSD) menu. This parameter identifies the length of time before the OSD menu times out and can be set from 30 to 60 seconds in ten-second increments. If NONE is selected, then the OSD will not turn off automatically.

CAUTION!

The NONE selection should only be used with caution. If the system includes a plasma display, or other display types sensitive to image burn-in, and the OSD Menu Time Out parameter is set to NONE, the OSD menu image can be burned into the monitor display.

BRIGHTNESS			FULL, HALF, OFF
SETUP	DISPLAY SETUP	FRONT PANEL DISPLAY	BRIGHTNESS

Selects the BRIGHTNESS parameter from the Front Panel Display menu, which selects the brightness of the 2-line front panel display. The parameter can be set to FULL, HALF, or OFF. If set to OFF, then the front panel display is off.

On the remote control, this parameter is controlled by the (Pause) button while in the touch screen LEX or TUNER menus.

Note: When the RV-5 is powered off or put into Standby mode, any changes to the BRIGHTNESS parameter are not saved. So when the RV-5 is powered on or taken out of Standby mode again, the BRIGHTNESS parameter will be set to FULL.

TIME OUT		NONE, 1 TO 10 SECONDS
SETUP	DISPLAY SETUP	FRONT PANEL DISPLAY	TIME OUT

Selects the TIME OUT parameter from the Front Panel Display menu. This parameter identifies the length of time before the front panel 2-line display times out. The parameter can be set from 1 to 10 seconds in one-second increments. If NONE is selected, then the 2-line front panel display is always on when the RV-5 is on.

3-4