Agilent Technologies 75000 SERIES B, E1301B, E1300B TRIGger DELay, Trigdelay .75 S

				TRIGger :DELay
TRIGger	The TRIGger command subsystem controls the behavior of the trigger system
	once it is initiated (see INITiate command subsystem). The trigger command
	subsystem controls:
	• The delay between trigger and first Pacer pulse (TRIG:DELay)
	• An immediate software trigger (TRIG:IMM)
	•	The source of the trigger (TRIG:SOUR BUS EXT HOLD IMM)
Subsystem Syntax	TRIGger
	:DELay < delay>
	:DELay? [MIN MAX]
	[:IMMediate]
	:SLOPe < slope>
	:SLOPe?
	:SOURce BUS EXT HOLD IMM
	:SOURce?
:DELay
	TRIGger:DELay < delay> sets the delay between receipt of trigger and first
	Pacer pulse.
Parameters
	Parameter		Parameter	Range of	Default
		Name	Type	Values	Units
		delay	numeric	250E -9s to 4.19430375s or	second
				MIN MAX
Comments	•	The resolution for delay is 250E -9 seconds.
	• Related Commands: ABORt, INITiate
	• *RST Condition: TRIG:DELay 2.5E -9
Example Setting delay between trigger and Pacer output.
		TRIG:SOUR HOLD		trigger is TRIG command
		SOUR:PULS:COUN 100		set Pacer to output 100 pulses
		SOUR:PULS:PER .1 S		pulse period set to .1 second
		TRIG:DELAY .75 S		start Pacer .75 sec after trigger
		INIT		go to Wait For Trigger state
		TRIG		trigger Pacer to output pulses

:DELay? TRIGger:DELay? [MIN MAX] returns:

•The current delay if no parameter is sent.

•The maximum allowable delay if MAX is sent.

•The minimum allowable delay if MIN is sent.

Example Querying the trigger delay setting.
TRIG:DEL .75 S	start Pacer .75 sec after trigger
TRIG:DEL?	command System Instrument
	to send TRIG:DEL value.
enter statement	input value of trigger delay

System Instrument Command Reference 7-51