Agilent Technologies E1301B, E1300B DIAGnostic Poke, Diagpoke 16252928,8,255, Diagrdisaddr?

DIAGnostic :POKE

:POKE	DIAGnostic:POKE < address> ,< width> ,< data> writes data (number of
	bits given by width) starting at address.
Parameters
	Parameter	Parameter	Range of	Default
	Name	Type	Values	Units
	address	numeric	0 to 16,777,215 (# HFFFFFF)	none
	width	numeric	8 16 32	none
	data	numeric	8 to 32 bit integer	none
Comments	• A ddress specifies a location within the range of the control processor’s
	addressing capability.

•Address and data may be specified in decimal, hex (# H), octal (# Q), or binary (# B) formats.

•CAUTION: DIAG:POKE can change the contents of any address in RAM. Changing the contents of RAM used by the Command Module’s control processor can cause unpredictable results.

•Related Commands: DIAG:PEEK?

Example Store byte in User non-volatile RAM

	DIAG:POKE 16252928,8,255
:RDISk:ADDress?
	DIAGnostic:RDISk:ADDress? Returns the starting address of the RAM disc
	volume previously defined with the DIAG:RDISk:CREate command. The RAM
	disc volume is defined for use only by the IBASIC option.
Comments	• DIAG:RDISk:CREAte does not allocate the RAM volume segment until
	after a subsequent re-boot. To get accurate results, execute
	DIAG:RDISk:ADDRess? after the re-boot.
	• Related Commands: DIAG:RDISk:CREate, DIAG:RDISk:CREate?
Example Return the starting address of the IBASIC RAM volume.
	DIAG:RDIS:ADDR?
	enter statement	statement returns decimal
		numeric address

System Instrument Command Reference 7-25