Agilent Technologies E1300B, E1301B user manual Agilent E1333A 3-Channel Universal Counter Menu

2-26 Using the Display Terminal Interface

Agilent E1333A 3-Channel Universal

Counter Menu

Menu Levels and Content

Level 1	Level 2	Level 3	Level 4	Level 5	User Entry	Command(s) Used		Description
COUNTER	MONITOR	CHAN1				DISP:MON:CHAN 1;STAT ON	Monitor instrument operations on channel 1
		CHAN2				DISP:MON:CHAN 2;STAT ON	Monitor instrument operations on channel 2
		CHAN3				DISP:MON:CHAN 3;STAT ON	Monitor instrument operation on channel 3
		AUTO				DISP:MON:CHAN AUTO;STAT ON	Monitor instrument operations on active channel
	INPUT	LEVEL	CHAN1		voltage †	SENS1:EVEN:LEV< value>	Set trigger level voltage for channel 1
			CHAN2		voltage †	SENS2:EVEN:LEV< value>	Set trigger level voltage for channel 2
		SLOPE	CHAN1	POS		SENS1:EVEN:SLOP POS	Positive trigger slope for channel 1
				NEG		SENS1:EVEN:SLOP NEG	Negative trigger slope for channel 1
			CHAN2	POS		SENS2:EVEN:SLOP POS	Positive trigger slope for channel 2
				NEG		SENS2:EVEN:SLOP NEG	Negative trigger slope for channel 2
		COUPLE	AC			INP:COUP AC	AC-coupled input (channels 1 & 2 only)
			DC			INP:COUP DC	DC-coupled input (channels 1&2)
		IMPED	50_OHM			INP:IMP 50	50Ω	input resistance (channels 1 & 2 only)
			1_MOHM			INP:IMP 1e6	1MΩ	input resistance (channels 1 & 2 only)
		ATTEN	0dB			INP:ATT 0	No input attenuation (channels 1 & 2 only)
			20dB			INP:ATT 20	20dB input attenuation (channels 1 & 2 only)
		FILTER	ON			INP:FILT ON	Input filter on (channels 1 & 2 only)
			OFF			INP:FILT OFF	Input filter off (channels 1 & 2 only)
	FREQ	CHAN1				TRIG:SOUR IMM;:MEAS1:FREQ?	Frequency measurement on channel 1
		CHAN2				TRIG:SOUR IMM;:MEAS2:FREQ?	Frequency measurement on channel 2
		CHAN3				TRIG:SOUR IMM;:MEAS3:FREQ?	Frequency measurement on channel 3
	PERIOD	CHAN1				TRIG:SOUR IMM;:MEAS1:PER?	Period measurement on channel 1
		CHAN2				TRIG:SOUR IMM;:MEAS2:PER?	Period measurement on channel 2

(continued on following page)