Agilent Technologies E1300B, E1301B Using the Display Terminal Interface, Using this Chapter

Chapter 3

Using the Display Terminal Interface

Using this Chapter	This chapter shows you how to use the Agilent E1300B and Agilent E1301B
	Mainframes’ Display Terminal Interface (terminal interface) to operate
	instruments in the mainframe. The terminal interface uses the built-in RS-232
	and/or the optional Agilent E1324A Datacomm Module to provide all of the
	features of the Agilent E1301B’s front panel, plus comfortable keyboard
	position and full screen display. It contains the following sections:

•	Terminal Interface Features	3-2
•	Using Menus	3-3
•	Executing Commands	3-13
•	General Key Descriptions	3-14
•	Using Supported Terminals	3-16
•	Using Other Terminals	3-19
•	In Case of Difficulty	3-23
•	Instrument Menus	3-25

Note	This chapter discusses using the display terminal interface. It assumes that you
	have already connected your terminal and configured it to communicate with
	your mainframe. For information on connecting and configuring your terminal,
	refer to Appendix C in this manual.

Using the Display Terminal Interface 3-1