Agilent Technologies E1301B, E1300B SBITs, SYSTemCOMMunicate SERialn RECeive PARity TYPE?

SYSTem:COMMunicate :SERial[n] [:RECeive] :PARity [:TYPE]?

:COMMunicate	SYSTem:COMMunicate:SERial[ n] [ :RECeive] :PARity[ :TYPE] ? returns the
:SERial[n] [:RECeive]	type of parity checked and generated.
:PARity [:TYPE]?
Example What type of parity checking is set?
	SYST:COMM:SER0:PAR?		ask for parity type
	enter statement		returns the string EVEN, ODD,
			Z ERO, ONE, or NONE
:COMMunicate
	SYSTem:COMMunicate:SERial[n][:RECeive]:SBITs < sbits>			Sets the
:SERial[n] [:RECeive]	number of stop bits to be used to transmit and receive data.
:SBITs
Parameters
	Parameter	Parameter	Range of		Default
	Name	Type	Values		Units
	sbits	numeric	1 2 MIN MAX		none
Comments	• Attempting to set sbits to other than those values shown will result in an
	error -222.

•While this command operates independently of either the … BITS or … PARity:TYPE commands, there are two combinations which are disallowed because of their data frame bit width. The following table shows the possible combinations:

… BITS	… PARity:TYPE	… SBITs	Frame Bits
7	NONE	1	9 - disallowed
7	NONE	2	10
7	Yes	1	10
7	Yes	2	11
8	NONE	1	10
8	NONE	2	11
8	Yes	1	11
8	Yes	2	12 - disallowed

•DIAG:BOOT:COLD will set … SBITs to 1.

•Related Commands: SYST:COMM:SER[n]:BAUD

•*RST Condition: No change

Example Configuring for 2 stop bits.

SYST:COMM:SER0:SBITS 2

7-46 System Instrument Command Reference