Agilent Technologies E1300B, E1301B Agilent E1326B/E1411B 5 1/2 Digit Multimeter Standalone Menu

2-20 Using the Display Terminal Interface

Agilent E1326B/E1411B 5 1/2 Digit Multimeter (Standalone) Menu

Menu Levels and Content

Level 1	Level 2	Level 3		Level 4	User Entry	Command(s) Used		Description
VOLTMTR	MONITOR					DISP:MON:STAT ON	Display instrument operations
	VDC					MEAS:VOLT:DC?	Measure DC volts
	VAC					MEAS:VOLT:AC?	Measure AC volts
	OHM					MEAS:FRES?	Measure 4-wire ohms
	TEMP	THERMIS		2252		MEAS:TEMP? FTH,2252	Measure °C of 2252Ω thermistor (4-wire measurement)
				5K		MEAS:TEMP? FTH,5000	Measure °C of 5kΩ	thermistor (4-wire measurement)
				10K		MEAS:TEMP? FTH,10000	Measure °C of 10kΩ	thermistor (4-wire measurement)
		RTD	385			MEAS:TEMP FRTD,85?	Measure °C of 100Ω	RTD with alpha = 385 (4-wire measurement)
				392		MEAS:TEMP FRTD,92?	Measure °C of 100Ω	RTD with alpha = 392 (4-wire measurement)
	TEST					* TST?	Run self-test, display results (0= pass; any other number= fail)

†Channel lists are of the form “ccnn” (single channel), “ccnn,ccnn” (two or more channels) or “ccnn:ccnn” (range of channels);where “cc” is the card number and “nn” is the channel number. For example, to access channel 2 on card number 1 specify 102.

‡The card number identifies a module within the Switchbox. The switch module with the lowest logical address is always card n umber 01. The switch module with the next successive logical address is card number 02 and so on.