Agilent Technologies E1300B Pace PROTocol?, SYSTem COMMunicate SERialn RECeive Pace PROTocol

SYSTem :COMMunicate :SERial[n] [:RECeive] :PACE [:PROTocol]

:COMMunicate SYSTem:COMMunicate:SERial[ n] [ :RECeive] :PACE[ :PROTocol] :SERial[n] [:RECeive] < protocol> enables or disables receive pacing (XON/XOFF) protocol.

:PACE [:PROTocol]

Parameters	Parameter	Parameter	Range of	Default
	Name	Type	Values	Units
	protocol	discrete	XON NONE	none
Comments	• While … PROT is XON, the serial interface will send XOFF when the

buffer reaches the … STOP threshold, and XON when the buffer reaches the … STARt threshold.

•For an Agilent E1324A, AUTO is always ON. In this case

…[:RECeive]:PACE will also set … TRAN:PACE

•The XON character is control Q (ASCII 1710, 1116), The XOFF character is control S (ASCII 1910, 1316).

•DIAG:BOOT:COLD will set … PACE to XON.

•Related Commands: … PROTocol:THReshold:STARt,

…PROTocol:THReshold:STOP, … TRAN:AUTO

•*RST Condition: No change

Example Enabling XON/XOFF handshaking.

SYST:COMM:SER0:PACE:PROT XON

:COMMunicate SYSTem:COMMunicate:SERial[n][:RECeive]:PACE[:PROTocol]? returns the :SERial[n] [:RECeive] current receive pacing protocol.

:PACE [:PROTocol]?

Example See if XON/XOFF protocol is enabled.
SYST:COMM:SER0:PACE:PROT?
enter statement	statement enters the string
	"XON" or "NONE"

System Instrument Command Reference 7-41