Agilent Technologies E1301B, E1300B, 75000 SERIES B user manual Unstrn

Scanning Voltmeter Menu

Menu Levels and Content

Level 1 Level 2 Level 3 Level 4 User Entry Command(s) Used Description

(continued from previous page)

	UNSTRN		channel list †	MEAS:STR:UNST? < channel_list>	Measure bridge unstrained
	DIAG	COMPRES	channel list †	MEAS:STR:QCOM? < channel_list>	Compression shunt diagnostic
		TENSION	channel list †	MEAS:STR:QTEN? < channel_list>	Tension shunt diagnostic
CARD	TYPE?		card number ‡	SYST:CTYP? < card_number>	Displays module ID information
	DESCR?		card number ‡	SYST:CDES? < card_number>	Displays module description
TEST				* TST?	Runs self-test, displays results (+ 0= pass; any other
					number= fail)

Using the Display Terminal Interface 2-19

†Channel lists are of the form “ccnn” (single channel), “ccnn,ccnn” (two or more channels) or “ccnn:ccnn” (range of channels);where “cc” is the card number and “nn” is the channel number. For example, to access channel 2 on card number 1 specify 102.

‡The card number identifies a module within the Switchbox. The switch module with the lowest logical address is always card n umber 01. The switch module with the next successive logical address is card number 02 and so on.