Agilent Technologies E1301B, E1300B, 75000 SERIES B Scpi Command, Reference, ABORt, Abort

ABORt

SCPI Command	This section describes the SCPI commands for the System Instrument.
Reference	Commands are listed alphabetically by subsystem and also within each
	subsystem. A command guide is printed in the top margin of each page. The
	guide indicates the first command listed on that page.
ABORt	The ABORT subsystem is a part of the System Instrument’s trigger system.
	ABORT resets the trigger system from its Wait For Trigger state to its Idle state
	and aborts any pacer pulse train in progress. ABORt performs the opposite
	function of the INITiate:IMMediate command. INITiate enables the trigger
	system, while ABORt disables it.
Subsystem Syntax	ABORt

Comments	•	ABORt does not affect any other settings of the trigger system. When the
		INITiate command is sent, the trigger system will respond just as it did
		before the ABORt command was sent.
	• Related Commands: INITiate, TRIGger
	•	*RST Condition: ABORT
Example Stopping Pacer pulses with ABORT
		TRIG:SOUR HOLD	trigger source is TRIG
			command
		SOUR:PULS:COUN 1E3	output 1000 Pacer pulses
		SOUR:PULS:PER .1 S	pulse period set to .1 second
		INIT	go to Wait For Trigger state
		TRIG	trigger the Pacer to output
			pulses
		.
		.
		ABORT	go to Trigger-Idle state and stop
			Pacer pulses

7-4 System Instrument Command Reference