Agilent Technologies E1301B, E1300B, 75000 SERIES B user manual Nram

System Instrument

SCPI Commands Quick Reference
Command	Description
:NRAM
:ADDRess?	Returns starting address of the User non-volatile RAM.
:CREate < size> MIN MAX	Creates a User non-volatile RAM segment.
:CREate? [MIN MAX]	Returns the current or allowable size of User NVRAM.
:PEEK? < address> MIN MAX,< width>	Returns an 8, 16, or 32 bit value from memory.
:POKE < address> MIN MAX,< width> ,< data>	Stores an 8, 16, or 32 bit value to RAM.
:RDISk
:ADDRess?	Returns the starting address of an IBASIC RAM volume.
:CREate < size> MIN MAX	Allocates RAM for an IBASIC RAM volume.
:CREate? [MIN MAX]	Returns the current or allowable size of the RAM vol.
:UPLoad
[:MADDress]? < address> ,< byte_count>	Returns data from non-volatile user RAM starting at address.
:SADDress? < address> , < byte_count>	Returns data from non-volatile user RAM at address.
INITiate
[:Immediate]	Enables trigger system to start Pacer.
[SOURce]
:PULSe
COUNt < numberic value>	Sets number of Pacer pulses per trigger.
COUNt? [MIN MAX]	Returns current count, or MIN MAX allowed value.
:PERiod < numeric value	Sets Pacer pulse period in seconds.
:PERiod? [MIN\ MAX]	Returns the current or allowable period value.
STATus
:OPERation
:CONDition?	Returns the state of the condition register.
:ENABle 256	Set Standard Operation Enable Register mask.
:ENABle?	Returns value of enable mask.
[:EVENt]?	Returns value of the bit set in the Event register (Standard Operation
	Status Group).
:PRESet	Presets status registers
:QUEStionable
:CONDition?	Always returns + 0.
:ENABle < mask>	Set Questionable Status Register enable mask.
:ENABle?	Returns value of enable mask.
[:EVENt]?	Always returns + 0.

7–76 Command Quick Reference