Agilent Technologies E1300B PARity CHECk?, SERialn RECeive, PARity Type, SYSTCOMMSER0PARCHEC on

SYSTem:COMMunicate :SERial[n] [:RECeive] :PARity :CHECk

:COMMunicate :SERial[n] [:RECeive] :PARity :CHECk

Parameters

Comments

SYSTem:COMMunicate:SERial[n][:RECeive]:PARity:CHECk < check_cntrl>

controls whether or not the parity bit in received serial data frames will be considered significant.

Parameter	Parameter	Range of	Default
Name	Type	Values	Units
check_cntrl	boolean	0 1 OFF ON	none

•When check_cntrl is set to 0 or OFF, received data is not checked for

correct parity. Transmitted data still includes the type of parity configured with … PARity:TYPE .

•DIAG:BOOT:COLD will set … CHECk to OFF.

•Related Commands: SYST:COMM:SER[n]:PARity:TYPE

•*RST Condition: No change

Example Set parity check to ON

	SYST:COMM:SER0:PAR:CHEC ON
:COMMunicate
	SYSTem:COMMunicate:SERial[n][:RECeive]:PARity:CHECk? returns the
:SERial[n] [:RECeive]	state of parity checking.
:PARity :CHECk?
Example Is parity checking on or off?
	SYST:COMM:SER0:PAR:CHEC?
	enter statement		statement enters 0 or 1
:COMMunicate:
	SYSTem:COMMunicate:SERial[n][:RECeive]:PARity[:TYPE] < type>
SERial[n] [:RECeive]	Configures the type of parity to be checked for received data, and generated for
:PARity [:TYPE]	transmitted data.
Parameters
	Parameter	Parameter	Range of	Default
	Name	Type	Values	Units
	type	discrete	EVEN ODD ZERO ONE NONE	none
Comments	• Attempting to set type to other than those values shown will result in an
	error -222.

7-44 System Instrument Command Reference