Agilent Technologies 75000 SERIES B, E1301B SYSTemCOMMunicate SERialnTRANsmit Pace PROTocol

SYSTem:COMMunicate :SERial[n]:TRANsmit :PACE [:PROTocol]

:COMMunicate SYSTem:COMMunicate:SERial[ n] :TRANsmit:PACE[ :PROTocol]
:SERial[n]:TRANsmit	< protocol> enables or disables the transmit pacing (XON/XOFF) protocol.
:PACE [:PROTocol]
Parameters
	Parameter	Parameter	Range of	Default
	Name	Type	Values	Units
	protocol	discrete	XON NONE	none
Comments	• For an Agilent E1324A, AUTO is always ON. In this case

… TRAN:PACE will also set … [RECeive]:PACE

•Receipt of an XOFF character (ASCII 1910, 1316) will hold off transmission of data until an XON character (ASCII 1710, 1116) is received.

•DIAG:BOOT:COLD will set … PACE to XON.

•Related Commands: SYST:COMM:SER[n]:TRAN:AUTo

•*RST Condition: No change

Example Set XON/XOFF transmit pacing

	SYST:COMM:SER0:TRAN:PACE:PROT XON
:COMMunicate
	SYSTem:COMMunicate:SERial[n]:TRANsmit:PACE[:PROTocol]? returns
:SERial[n] :TRANsmit	the current transmit pacing protocol.
:PACE [:PROTocol]?
Example Check transmit pacing protocol
	SYST:COMM:SER0:TRAN:PACE:PROT?
	enter statement		statement enters the string
			"XON" or "NONE"
:DATE
	SYSTem:DATE < year> ,< month> ,< day> sets the E1300/E1301
	mainframe’s internal calendar.
Parameters
	Parameter	Parameter	Range of	Default
	Name	Type	Values	Units
	year	numeric	must round to 1980 to 2079	none
	month	numeric	must round to 1 to 12	none
	day	numeric	must round to	none
			1 through last day of month
Comments	• The upper limit on the day parameter is dependent on the month
	parameter and may be dependent on the year parameter in the case of a
	leap year.

7-48 System Instrument Command Reference