Agilent Technologies 75000 SERIES B, E1301B, E1300B user manual VXI SELect

VXI :SELect

:SELect	VXI:SELect < logical_addr> specifies the logical address which is to be used by
	many subsequent commands in the VXI subsystem.
Parameters
	Parameter	Parameter		Range of	Default
	Name	Type		Values	Units
	logical_addr	numeric		0 through 255	none
Comments	• The *RST default value for		logical_addr is that no logical address is
	selected (i.e., -1). All other commands which require a logical address to
	be selected will respond with Error -221 ("settings conflict") if no logical
	address is selected.

•When a command encounters an Error -240 ("Hardware Error") the equivalent of a *RST is executed. This will cause the selected logical address to be set to -1.

•Related Commands: VXI:CONF:LADD?

Example Select a logical address
VXI:SEL 64	sets the logical address to be
	used by subsequent VXI
	subsystem commands to 64.

:SELect? VXI:SELect? returnsthe logical address which will be used by many subsequent commands in the VXI subsystem. If no logical address has been selected, this query will return -1.

System Instrument Command Reference 7-63