Agilent Technologies E1300B, E1301B, 75000 SERIES B SYSTemTIME, Systtime 14,30,20, Systtime?

SYSTem:TIME

:TIME	SYSTem:TIME < hour> ,< minute> ,< second> sets the E1300/E1301
	mainframe’s internal clock.
Parameters
	Parameter	Parameter	Range of	Default
	Name	Type	Values	Units
	hour	numeric	must round to 0 to 23	none
	m inute	numeric	must round to 0 to 59	none
	second	numeric	must round to 0 to 60	none
Comments	• Related Commands: SYST:DATE, SYST:DATE?, SYST:TIME?

•*RST Condition: *RST does not change the Command Module’s real time clock.

Example Setting the system time
SYST:TIME 14,30,20	set 2:30:20 PM

:TIME? SYSTem:TIME? [MAX MIN,MAX MIN,MAX MIN] returns:

•When no parameter is sent; the current system time in the form

+ HH,+ MM,+ SS, where HH can be 0 through 23 hours, MM can be 0 through 59 minutes, and SS can be 0 through 60 seconds.

•When parameters are sent; the minimum or maximum allowable values for each of the three parameters. The parameter count must be three.

Example Querying the system time
SYST:TIME?	ask for current time
input values of hour,min,sec	read back time

:VERSion?	SYSTem:VERSion? Returns the SCPI version for which this instrument
	complies.
Comments	• The returned information is in the format: YYYY.R; where YYYY is the
	year, and R is the revision number within that year.
	• Related Commands: *IDN?
Example Determine compliance version for this instrument.
	SYST:VERS?
	enter statement	Statement enters 1990.0

7-50 System Instrument Command Reference