Agilent Technologies E1300B, E1301B DRIVerLOAD, Parameters Comments Example, Diagdrivload

:DRIVer:LOAD

<driver_block>

Parameters

Comments

Example

:DRIVer :LOAD: CHECked

< driver_block>

Parameters

DIAGnostic :DRIVer:LOAD < driver_block>

DIAGnostic:DRIVer:LOAD < driver_block> loads the instrument driver

contained in the driver_block into a previously created DRAM segment.

Parameter	Parameter	Range of	Default
Name	Type	Values	Units
driver_block	arbitrary block	See "Parameter Types" at the	none
	program data	beginning of this chapter.

•driver_block is the actual binary driver data to be transferred.

•Related Commands:DIAG:DRAM:AVAilable?, DIAG:DRAM:CREate, DIAG:DRIVer:LIST...?.

Download a driver block.

DIAG:DRIV:LOAD

downloads the driver < driver_block> to DRAM memory.

DIAGnostic:DRIVer:LOAD:CHECked < driver_block> loads the instrument driver contained in the driver_block into a previously created DRAM segment. The driver_block is formatted in the same data byte format used by DOWNload:CHECked.

Parameter	Parameter	Range of	Default
Name	Type	Values	Units
driver_block	arbitrary block	See "Parameter Types" at the	none
	program data	beginning of this chapter.

Comments	•	driver_block is the actual binary driver data to be transferred.
	• This is the only way to download a device driver over a serial (RS232C)
		line.
	•	Related Commands:DIAG:DRAM:AVAilable?,
		DIAG:DRAM:CREate, DIAG:DRIVer:LIST...?.

Example Download the driver named DIGITAL.DC.

DIAG:DRIVer:LOAD:CHEC

downloads the driver < driver_block> to DRAM memory.

System Instrument Command Reference 7-17