Agilent Technologies 75000 SERIES B SOURce, PULSeCOUNt?, Sourpulscoun 1E3, Sourpulscoun?

[SOURce]:PULSe:COUNt
[SOURce]	The System Instrument contains a Pacer which produces TTL level pulses. The
	SOURCE command subsystem controls the number and period of these pulses.
	The output of the Pacer is available at the rear-panel BNC connector labeled
	“Pacer Out”.
Subsystem Syntax	[SOURce]
	:PULSe
	:COUNt < count>
	:COUNt? [MIN MAX]
	:PERiod < period>
	:PERiod? [MIN MAX]
:PULSe:COUNt
	SOURce:PULSe:COUNt < count>		sets the number of Pacer pulses that are
	generated when the trigger condition is satisfied.
Parameters
	Parameter	Parameter	Range of	Default
	Name	Type	Values	Units
	count	numeric	1 to 8,388,607 9.9E37	none
			INFinity MIN MAX
Comments	• When count is set to INFinity or 9.9E37, pulses are continuous.
	• Related Commands: ABORT, INIT, TRIG
	• *RST Condition: SOUR:COUN 1
Example Setting the Pacer pulse count.
	TRIG:SOUR HOLD		trigger source is TRIG
			command
	SOUR:PULS:COUN 1E3		output 1000 Pacer pulses
	SOUR:PULS:PER .1 S		pulse period set to .1 second
	INIT		go to Wait For Trigger state
	TRIG		trigger the Pacer to output
			pulses
:PULSe:COUNt?
	SOURce:PULSe:COUNt? [MIN MAX] returns:
	• The current count if no parameter is sent.
	• The maximum allowable count if MAX is sent.
	• The minimum allowable count if MIN is sent.
Example Querying the pulse count.
	SOUR:PULS:COUN 1E3		output 1000 Pacer pulses
	SOUR:PULS:COUN?		query system for pulse count
	retrieve value

7-30 System Instrument Command Reference