Agilent Technologies E1300B, E1301B user manual NRAMCREate, DIAGnostic NRAMADDRess?, Diagnramaddr?

DIAGnostic :NRAM:ADDRess?

:NRAM:ADDRess?	DIAGnostic:NRAM:ADDRess? Returns the starting address of the non-volatile
	User RAM segment allocated using DIAG:NRAM:CREate.
Comments	• DIAG:NRAM:CREAte does not allocate the RAM segment until after a
	subsequent re-boot. To get accurate results, execute
	DIAG:NRAM:ADDRess? after the re-boot.
	• Related Commands: DIAG:NRAM:CREate, DIAG:NRAM:CREate?,
	DIAG:DOWNload, DIAG:UPload?
Example Determine address of the most recently created User RAM segment
	DIAG:NRAM:ADDR?
	enter statement		statement returns decimal
			numeric address
:NRAM:CREate
	DIAGnostic:NRAM:CREate < size>		allocates a segment of non-volatile User
	RAM for a user-defined table.
Parameters
	Parameter	Parameter	Range of	Default
	Name	Type	Values	Units
	size	numeric	0 to available RAM or	none
			MIN MAX
Comments	• The RAM segment will be created only after the System Instrument has
	been re-booted (cycle power or execute DIAG:BOOT).

•Based on the size specified, DIAG:NRAM:CRE rounds the size up to an even value.

•NRAM will de-allocate a previously allocated RDISk segment.

•Using all of the available RAM (MAX) for the NRAM segment will limit some functions such as IBASIC program space, instrument reading storage space, and full functionality of the Display Terminal Interface.

•Use DIAG:NRAM:ADDR? to determine the starting address of the RAM segment.

•Use DIAG:DOWNload, DIAG:UPLoad?, DIAG:PEEK, or DIAG:POKE to store and retrieve information in the non-volatile RAM segment.

•Use DIAG:NRAM:CRE? MAX to find maximum available segment size.

•Related Commands: DIAG:NRAM:CREate?, DIAG:NRAM:ADDRess?, DIAG:DOWNload, DIAG:UPLoad?

Example Allocate a 15 Kbyte User Non-volatile Ram segment.

DIAG:NRAM:CREate 15360	allocate 15 Kbyte segment of
	User Ram .

System Instrument Command Reference 7-23