Agilent Technologies 75000 SERIES B DIAGnosticNRAMCREate?, DIAGNRAMCREate?, DIAGPEEK? 16252928,8

DIAGnostic:NRAM:CREate?

:NRAM:CREate? DIAGnostic:NRAM:CREate? [MIN MAX] Returns the current or allowable (MIN MAX) size of the User non-volatile RAM segment.

Comments	• DIAG:NRAM:CRE does not allocate driver RAM until a subsequent
	re-boot. To get accurate results, execute DIAG:NRAM:CRE? after the
	re-boot.
	• Related Commands: DIAG:NRAM:ADDRess?, DIAG:NRAM:CREate
Example Check the size of the User RAM segment.
	DIAG:NRAM:CREate?
	enter statement			statement enters size in bytes
:PEEK?
	DIAGnostic:PEEK? < address> ,< width>			reads the data (number	of bits
	given by width) starting at address.
Parameters
	Parameter	Parameter		Range of		Default
	Name	Type		Values		Units
	address	numeric	0 to 16,777,215 (# HFFFFFF)			none
	width	numeric		8 16 32		none
Comments	• Address specifies a location within the range of the control processor’s
	addressing capability.

•Address may be specified in decimal, hex (# H), octal (# Q), or binary (# B) formats.

•Related Commands: DIAG:POKE

Example Read byte from User non-volatile RAM
DIAG:PEEK? 16252928,8	ask for byte
enter statement	return value of byte

7-24 System Instrument Command Reference