QSC Audio DSP 322UA Preliminary Specification, Thru, Distortion 20Hz-20KHz, all sensitivities

Preliminary Specification

	IN		OUT	THRU
Dynamic Range (AES-17, -60dB Method, all sensitivities)
unweighted	>110dB		>112dB	>108dB
A weighted	>113dB		>115dB	>111dB
Distortion (20Hz-20 KHz, all sensitivities)
Gain= 0 - 30dB	<0.008% THD+N		<0.009% THD+N	<0.009% THD+N
Gain >30dB	<0.05% THD+N		<0.009% THD+N	<0.05% THD+N
Crosstalk (20Hz - 20KHz)
inter-channel (max)	>75dB
inter-channel (typ)	>90dB
intra-channel (max)	>85dB
intra-channel (typ)	>100dB
Frequency Response
20Hz - 20KHz (max)	± 0.5dB
20Hz - 20KHz (typ)	± 0.2dB
Program Inputs	8
Connector Type	3-pin "Phoenix Style" (a.k.a. "Euro Style") detachable terminal blocks
Type	Electrically balanced
Grounding	All shield terminals connected to chassis
Pinout	1:+ 2:- 3:CHASSIS GND
Input Impedance (nom.)	Balanced: 6.81k ohms		Unbalanced: 13.6k ohms
Common-Mode Rejection	20Hz - 20KHz (min.): >54dB,20Hz - 20KHz (typ.): >60dB
E.I.N.(max.)	150 ohm, 30dB: -124.5dBu150 ohm, 60dB: -125.0 dBu
Input Sensitivities (variable)	Vrms: 0.9 mV to 15.46 V		dBu: -62.2 to +26dBu	dBV: -64.4 to +23.7 dBV
Phantom Power (per IEC1938 (1996))	+48V (software-selectable)
Program Outputs	8
Connector Type	3-pin "Phoenix Style" (a.k.a. "Euro Style") detachable terminal blocks
Type	Electrically balanced
Grounding	All shield terminals connected to chassis
Pinout	1:+ 2:- 3:CHASSIS GND
Maximum Output Level	9V (rms ), +21.2 dBu, +19 dBV
Audio Converters	24 bit, 48KHz, in and out
Mute	infinite attenuation
Delay
DSP 322ua in stand-alone mode
Analog input through full DSP chain to analog outputs		2.354 milliseconds (Default Group Delay)

Specifications are subject to change without notice.

18