9 • Troubleshooting

Problem: Nothing happens; fan does not move.

1.Turn power on, replace fuse, or reset breaker..

2.Loosen canopy, check all connections according to the wiring the fan section..

3.Check the plug connection in the switch housing..

4.Push motor reversing switch firmly left or right to ensure that the switch is engaged..

5.Pull the pull chain to ensure it is on..

6.Remove the shipping bumpers..

Problem: Noisy operation.

1.Tighten the blade assembly screws and blade iron armature screws until snug..

2.Check to see if the blade is cracked.. If so, replace all the blades..

Problem: Excessive wobbling

1.Make sure the blades are securely attached to the blade irons according to the blade assembly instructions provided..

2.After thoroughly verifying the blades are securely attached to the blade irons, follow the instructions in the enclosed balancing kit to balance the fan..

3.Turn power off, support fan very carefully, and check that the hanger ball is properly seated..

If you need parts or service assistance, please call 8888301326 (In Canada, call 866-268-1936) or visit us at our website at http://www..hunterfan..com..

Hunter Fan Company

7130 Goodlett Farms Pkwy.. #400

Memphis, Tennessee 38016

17

42443-01 • 09/20/10 • Hunter Fan Company

Page 17
Image 17
Hunter Fan 42443-01 installation manual Troubleshooting, Problem Nothing happens fan does not move, Problem Noisy operation