Caring for Your Iron and Soleplate
1.The Water Tank of your iron should be emptied after each use. Turn
Temperature Control Dial to OFF. Unplug the iron and hold over a sink. Turn iron upside down until Water Tank Opening is parallel with sink. Water will run out of water tank opening.
2.After iron has completely cooled,
wrap cord loosely around the iron and store in an upright position. Do not store iron laying flat on soleplate.
Soleplate
1.Never iron over zippers, pins, metal rivets, or snaps, as these may scratch the soleplate.
2.To clean occasional
3.Always store iron upright in the heel rest position.
Troubleshooting
PROBLEM | THINGS TO CHECK | ||
| Won’t | • Is the iron plugged in and the outlet working? | |
| heat | Check the outlet by plugging in a lamp. | |
|
|
| • Is the Temperature Control Dial turned to a |
|
|
| fabric setting? |
|
|
| • If automatic shutoff model, is light on? If not, |
|
|
| press Reset Button. |
|
|
|
|
|
|
| • Do not overfill the water tank. |
| Water is | ||
| leaking |
| • If steam ironing, is Adjustable Steam Switch in |
|
|
| a steam position, the Temperature Control Dial |
|
|
| |
|
|
| in the steam range and did the iron have |
|
|
| enough time to preheat? |
|
|
| • If dry ironing, make sure the Adjustable Steam |
|
|
| Switch is in the DRY IRON position. |
|
|
| |
| Won’t | • Check the water level. | |
| steam | • Is the Adjustable Steam Switch in the STEAM | |
|
|
| position? |
|
|
| • Has the iron had enough time to preheat? |
|
| ||
Leaves | • ALWAYS empty the water tank of the iron | ||
spots | after using. Water left in the tank may discolor | ||
|
|
| clothing and soleplate. |
|
| ||
Twisted | • If the iron cord should become twisted, unplug | ||
cord | iron and let cool. Hold iron cord in the middle | ||
|
|
| of entire length. Let plug and iron dangle freely |
|
|
| until cord uncoils. This will extend the life of |
|
|
| your iron cord. |
8 | 9 |
