Hunter Fan 42443-01 installation manual Wiring the Fan, Dual Switch Wiring, Single Switch Wiring

4 • Wiring the Fan

All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.

Wall switches are not included.. Select an acceptable general-use switch in accordance with national and local electrical codes..

Wire Connector

4-1. Before attempting installation, make sure the power is still off..

4-2. To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise until tight.. For all these connections use the wire connectors provided..

4-3. Connect the bare or green ground wire (grounding) from the ceiling to the green ground wire (grounding) from the ceiling plate and the green ground wire (grounding) from the fan..

4-4. Connect the white wire (grounded) from the ceiling to the white wire (grounded) from the fan..

4-5. Connect the remaining wires as follows:

Dual Switch Wiring:

•The black wire (ungrounded) from the ceiling to the black wire (ungrounded) from the fan

•The black/white wire (ungrounded) from the fan to the wire (ungrounded) for the wall switch

Single Switch Wiring:

•The black wire (ungrounded) from the ceiling to the black (ungrounded) and the black/white wire (ungrounded) from the fan

CAUTION: Be sure no bare wire or wire strands are visible after making connections..

4-6. Turn the splices upward and push them carefully back through the ceiling plate into the outlet box..

4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box..

9

Dual Switch Wiring

Single Switch Wiring

42443-01 • 09/20/10 • Hunter Fan Company