Hunter Fan 42443-01 installation manual Installing the Glass Bowl, Breakaway Connector

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Installing the Glass Bowl

7-6. First install included 14W CFL bulbs into the sockets..

7-7. Thread the light and fan pull chains through the hole in the center of the glass bowl.. Then, thread the light pull chain through the hole in the center of the cover plate..

7-8. Thread the fan pull chain through the grommet hole in the side of the cover plate..

7-9. Place the cover plate up against the glass bowl.. Align the holes in the cover plate and glass bowl..

7-10. Thread the light pull chain through the finial and screw the finial onto the threaded rod end until

tight..

7-11. Attach the extra pull chains (included) to the light and fan pull chains using the breakaway connector.. (You may find the breakaway connector on the end of the extra chain..)

Breakaway

Connector

For Light Bulbs

Metal Disc

Metal Rod

Glass Bowl

Cover Plate

Finial

14

42443-01 • 09/20/10 • Hunter Fan Company