Installation Instructions
TENDENCE
2086
SINGLE LEVER
LAVATORY FAUCET
Thank you for selectingTo ensure that your installation proceeds
Certified to comply with ANSI A112.18.1
M968712 REV . 1 . 2
TOOLS REQUIRED
Adjustable Wrench | 3/32" Hex Key |
Channel Locks | Plumbers' Putty or Caulking |
|
1 FAUCET INSTALLATION
CAUTION | Turn off water at |
main supply. |
For
apply Putty to underside of Escutcheon (4) and place over holes in lavatory sink with tab towards back.
Feed faucet tubes through Rubber Ring (2)
and through hole in Escutcheon (4) or mounting surface. Make sure Rubber Ring (2) is seated in groove in base of Faucet (1). Escutcheon (4)
is optional on single hole lavatories.
From below, push Mounting Gasket (5) and Mounting Washer (6) over Stud (3) and secure with Nut (7), pushing Faucet (1) to back of sink, so Stud (3) rests against sink hole. Before final tightening, adjust Faucet (1) and Escutcheon (4) so that they are centered.
Carefully bend and/or cut supply tubes and connect left tube to HOT water and right tube to COLD water supply using appropriate connectors.
2
PUTTY
3
4
LAVATORY
6
7