Sun Microsystems X4150 Server Installing the Cable Management Arm, 7Cable Management Arm CMA

Installing the Cable Management Arm

Use this procedure to install an optional cable management arm (CMA). FIGURE 2-7shows the CMA.

FIGURE 2-7Cable Management Arm (CMA)

CMA rail extension

1.Unpack the cable management arm parts.

2.Take the CMA to the back of the equipment rack and ensure that you have adequate room to work around the back of the server.

Note – References to “left” or “right” in this procedure assume that you are facing the back of the equipment rack.

3.Remove tape to separate parts.

The CMA rail extension might be taped to the CMA arm.

4.Attach the CMA rail extension into the left slide-rail until the extension locks into place with an audible click. (See FIGURE 2-8.)

FIGURE 2-8Inserting the CMA Rail Extension Into the Back of the Left Slide-Rail

Chapter 2 Installing the Sun Fire X4150 Server Into a Rack with Slide-Rails 21