![](/images/new-backgrounds/1170679/170679147x1.webp)
2.Use a stylus, pen, or other
When the main power is applied to the server, the Power/OK LED next to the Power button lights and remains lit, as shown in FIGURE
FIGURE 6-1 Front Panel Power/OK LED
Note – The first time the server powers on, the power on
Power Off from Main Power Mode
To remove main power from the server, use one of the following two methods:
TABLE
ShutdownMethod
Graceful shutdown Use a pen, or other pointed object, to press and release the Power button on the front panel. This causes Advanced Configuration and Power Interface
Emergency shutdown Press and hold the Power button for at least four seconds until the main power is off and the server enters standby power mode. When the main power is off, the Power/OK LED on the front panel flashes, indicating that the server is in standby power mode.
Caution – To completely power off the server, you must disconnect the AC power cords from the back panel of the server.