![](/images/new-backgrounds/1170679/170679115x1.webp)
Using the GRUB Menu
The preinstalled Solaris 10 OS image directs console output to the serial port by default. After the initial configuration of the preinstalled Solaris OS is complete, you can modify the Solaris 10 GRUB menu to direct output to the video port by default.
Caution – This procedure is intended only for advanced users of the Solaris OS. You can seriously disrupt server operation or make the server unbootable if you introduce a problem in the menu.lst file.
To set the video port as the default output, do the following procedure:
1.Open the /boot/grub/menu.lst file in a text editor.
2.Modify the following line in the file to change the default so that the console output goes to the video port:
default 1
3.Run the following command to add the Xserver startup scripts:
/usr/dt/bin/dtconfig
4.Reboot the server. After the system reboots, the console output goes to the video port by default.
Configuring Sun Fire X4150 Server RAID Drives
After you configure the Solaris OS, you might need to configure the RAID drives.