![](/images/new-backgrounds/1170679/17067999x1.webp)
■8N1: eight data bits, no parity, one stop bit
■9600 baud
■Disable hardware flow control (CTS/RTS)
■Disable software flow control (XON/XOFF)
e.Connect a null serial modem cable from the server’s back panel RJ45 serial port to a terminal device (if not connected already).
See FIGURE 1-5 for the serial port position.
f.Press Enter on the terminal device to establish a connection between the terminal device and the Embedded LOM service processor (SP).
The following prompt appears.
3.Use a pencil, or other pointed object, to press and release the recessed Power button on the server front panel.
When main power is applied to the server, the Power/OK LED next to the Power button lights and remains lit.
4.To display a screen for installing the preinstalled Solaris OS from the system management port, perform the following
a.Type cd /SP/AgentInfo
b.Type start Console
5.Install and configure the software, as required.
Note – To switch back to the Embedded LOM
Installing the Intel PROSET Teaming Utility.
To install the Intel PROSET Teaming Utility.
1.Install the Ethernet drivers from the Tools & Drivers CD Version 1.1, using your preferred method.