Sun Microsystems X4150 Server manual Disassembling Slide-Rails, Disassembling Bolt-On Slide-Rails

Disassembling Slide-Rails

Do one of the following procedures before installation:

■“Disassembling Bolt-OnSlide-Rails” on page 12

■“Disassembling Tool-lessSlide-Rails” on page 13

Disassembling Bolt-On Slide-Rails

To remove the mounting-brackets from the bolt-on slide-rail assemblies:

1.Unpack the slide-rails.

2.Locate the slide-rail lock at the front of one of the slide-rail assemblies, as shown in FIGURE 2-1.

3.Squeeze and hold the tabs at the top and bottom of the lock while you pull the mounting-bracket out of the slide-rail assembly until it reaches the stop. (See

FIGURE 2-1).

4.Push the mounting-bracket release button toward the front of the mounting- bracket, as shown in FIGURE 2-1, and simultaneously withdraw the mounting- bracket from the slide-rail assembly.

12 Sun Fire X4150 Installation Guide • January 2008