Hunter Fan 42443-01 installation manual Uninstalling the Light Fixture

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Uninstalling the Light Fixture

7-12. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black wire with a white

stripe..

7-13. Disconnect the plug connectors between the two white
	wires..
7-14.	Remove the two screws attaching the light kit to the lower	Lower
	switch housing..	Switch Housing
7-15. Remove the light fixture from the lower switch housing,
	pulling disconnected wires through the hole in the center of
	the lower switch housing..
	Note: When removing the wires, pull the thin plug
	connector (male) through first, and then pull the other plug
	connector (female) through the hole..
7-16.	Install the dummy terminals (included in the sack parts) on	Threaded Rod
	the two disconnected wires in the lower switch housing..
7-17.	Install the switch housing cap and plug button to the lower
	switch housing..
7-18.	Once you have uninstalled the light fixture, continue
	with Step 7‑1..
		Steps 7-14 – 7-16

Male Dummy

Terminal

Female Dummy Terminal

Cap

Plug Button

Step 7-17

15

42443-01 • 09/20/10 • Hunter Fan Company