Philips MAT972KB QUG Connecting the IR Blaster, continued, Connecting the Telephone Cord

Step 3 Connecting the IR Blaster, continued

After you have connected the Internet Terminal and signed up with the WebTV Network, you must set up your IR Blaster to work with your equipment. Simple instructions are available after you sign up with the WebTV Network. Follow these steps to access the instructions.

1

Once you are connected to the WebTV Network, press the VIEW button until the TV Home page appears on the screen.

2

Use the Arrow buttons to select Settings. Press the GO button.

3

Use the Arrow buttons to select Hooking up. Press the GO button. You’ll be guided through a few screens to complete the setup of your VCR, Cable Box, or Satellite Box.

Step 4 Connecting the Telephone Cord

				Audio	Video
				In		In
					w e b e y e	Cable
Phone IR Blaster	Printer Port	Mic	R	L	S-Video	Out	AC Input
				Out	Channel
					3	4

Connect the telephone cord to the Phone jack on the back of the Internet Terminal and to your home’s telephone jack.

Use a telephone jack that isn’t connected to a telephone. If you have only one telephone jack, plug the T-splitter into the wall telephone jack, then plug your phone into one side and the telephone cord for the Internet Terminal into the other side of the T-splitter.

Go to step 5 - Connecting the webeye.

Connections

22