TV Home Page
On-Screen VCR Controls
You may use your Internet Terminal’s remote control to operate your VCR. Do not use your VCR’s remote; the VCR controls will appear on the TV screen.
If you can’t use your Internet Terminal remote control to operate your VCR, make sure your IR Blaster is set up properly. Details are on pages 21- 22.
A Combination TV/VCR (a TV with a
1
Go to the TV Home Page.
2
Use the Arrow buttons to select VCR, then press the GO button. Some VCR control buttons will appear on the screen, including POWER, TV/VCR, REC(ORD), PAUSE, PLAY, STOP, REW(IND) and FF (fast for- ward).
3
To activate the VCR controls, use the Arrow buttons on the Internet Terminal’s remote control to select an
To turn on the VCR, select the POWER button.
If you don’t see a picture, select the TV/VCR button.
You can view the VCR playback in
VCR Programming
You can program your VCR to record an upcoming show. You may select any upcoming show (up to a week in advance) from the TV Listings.
1
Go to the TV Home page.
2
Use the Arrow buttons to select TV Listings, then press the GO button.
3
Select an upcoming show that you want to record. The Program Info page appears. (If you select a show that is in progress, the program will appear in
4
Use the Arrow buttons to select Record, then press the GO button.
5
Insert a tape in your VCR. Turn off the VCR.
Note: WebTV may ask you to set up your VCR. Go to the TV Home Page and choose Settings for more information. For details on connecting your VCR to the Internet Terminal, see pages
34