Lexicon RV Receiver manual Specifications, Inputs, Hdmi Performance, Outputs

Appendix A

SPECIFICATIONS

Lexicon

Inputs

HDMI (Version 1.1)	2 HDMI Type A, 19-pin connectors
Analog Video	•	Three component video, RCA connectors
	•	Four S-Video connectors
	•	Four composite video, RCA connectors
Digital Audio	•	Four S/PDIF coaxial (RCA) and four S/PDIF optical
		(Toslink) connectors
	•	Coaxial & optical input connectors conform to IEC-958,
		S/PDIF standards
	• One USB mini-B connector
Analog Audio	• One 8-channel input array, RCA connectors
	• Six Stereo RCA connectors
	• One microphone, 3.5mm mono mini plug
	• 1 DOCK 30-pin connector (for optional docking station)
	• 1 FM antenna
	• 1 AM antenna
	•	Input sensitivity = max input level 2Vrms
Control	•	One RS-232, 9-pin, D-sub connector
	•	One IR receiver, on front panel
	• One 3.5mm IR IN jack:
		Input Voltage: 3V - 15V
		Input Current: 10mA
		Frequency: 20Hz - 1KHz
		Accepts either stereo plug (Tip/Ring/Sleeve) or mono
		plug (Tip/Sleeve)

HDMI Performance

HDMI Input	Video: 480i/p, 576i/p, 720p, or 1080i
	Audio: Dolby Digital, DTS, & PCM (32, 44.1, 48, 88.2, 96 kHz,
	176.4 kHz, and 192 kHz)
HDMI Output	Video: 480i/p, 576i/p, 720p, or 1080i
	Audio: Dolby Digital, DTS, & PCM (32, 44.1, 48, 88.2, 96kHz,
	176.4kHz. and 192kHz)

Outputs

HDMI (Version 1.1)	One HDMI Type A, 19-pin connector
Analog Video	• One component video, RCA connector
	•	One S-Video connector
	•	One composite video, RCA connector
Analog Audio	•	7-channel amplified, binding posts
	•	One 8-channel preamplifier plus additional subwoofer,
		RCA connectors
	•	Bare wire: Up to 10 gauge
Control	Two triggers - one power on/off & one programmable
	3.5mm mono mini plugs
	12VDC, 300mA maximum output draw

S-Video& Composite Video Performance

Compatibility	NTSC, PAL, and SECAM
A/D converter	12-bit, 110MHz
D/A converter	12-bit, 74.25MHz
Input Level /	1V peak-to-peak/75Ω
Impedance
Output Level /	1V peak-to-peak/75Ω
Impedance
Frequency Response	Composite: 10Hz to 8MHz, -3dB
	S-Video: 10Hz to 8MHz, -3dB
	Component: 10Hz to 100MHz, -3dB
Signal-to-Noise Ratio	>65dB
Differential Gain	<0.2%
Differential Phase	<0.5 degrees
Gain	+/- 0.15dB

A-2