Lexicon RV Receiver manual PC Controls, Save, Setting UP to Play

Tuner, PC, & Dock Controls Lexicon

SAVE

Stores a radio station into a preset location.

To Save a Radio Station to a Preset Location:

1.Tune to the station frequency and band that you want to save.

2.Press SAVE. A blinking preset number or dashed lines are displayed.

Note: If nothing is pressed after the SAVE button, the preset will blink for several seconds before the save function is cancelled.

3.Press Preset +/- or Tune +/- to scroll through the presets.

4.Press SAVE again to save the station into the selected preset.

If the selected preset already has a station saved to it, the RV-5 will seek confirmation of the action. The message, “Press again to write”, is displayed.

Note: If no action is taken for five seconds, the RV-5 will time out and resume normal operation; the station will not be saved to the preset.

PC CONTROLS

The RV-5 is capable of direct connection to a computer for audio playback. Once connected, playback of audio streams from a computer are possible through your RV-5 Receiver, with all the power and performance of the high-current amplifier, your own speakers, and the enhanced multi-channel playback made possible through the use of Logic 7, Dolby Pro Logic II/IIx, or DTS Neo:6 processing.

SETTING UP TO PLAY

The RV-5 Receiver connects to a PC-compatible computer through the USB jack on the rear panel. Connect one of the available USB jacks on your computer to the USB jack on the RV-5 rear panel using a cable with one standard USB connector and one USB “Mini B” connector. Only the PC input can be used with computer media players.

Note: The PC Input setup displays Digital Audio as USB, Analog Audio as NONE, and the Dig/Anlg Auto parameter is dashed out. These three parameters cannot be changed for the PC Input.

The RV-5 may be used with PC-compatible computers running Microsoft Windows 2000® with Service Pack 4 or higher installed,

Vista®, Windows XP®, or Windows XP Media Center Edition with Service Pack 1 or higher installed. In addition, you will need to have a media player installed on the computer. The RV-5 has been tested

for operation with Windows Media Player® Version 8.0 and above, but it is also compatible with many other popular players such as

iTunes®, WinAmp®, and Real Player®. Always verify that you have the latest version of the player installed to ensure the best compatibility and performance.

When the connection between a computer and the RV-5 is made for the first time, or if the USB connection is plugged into a different

5-4