Lexicon RV Receiver manual Video Status, Audio Status

Audio Controls & Video Status Lexicon

AUDIO STATUS

• INPUT RESOL identifies the current input resolution setting.

AUDIO CONTROLS

AUDIO STATUS

INPUT: HD+ NAME:

CONNECTOR: ANALOG 3

AUDIO: - - -

MODE FAMILY: LOGIC 7

MODE: MUSIC 5.1

• COPY PROTECTION identifies the current status of copy

protection.

• V-PROCESS identifies the current setting of the video processor.

• OUTPUT RESOL identifies the current output resolution setting

of the HDMI and component outputs.

Note: The HDMI and component output resolution values are always

the same, unless copy protection is active. In some cases, copy

The AUDIO STATUS menu is an information-only menu identifying the current audio status of the RV-5.

•INPUT identifies the currently selected input.

•NAME identifies the customer-chosen name, if any, for the currently selected input.

•CONNECTOR identifies the current audio connector in use.

•AUDIO identifies what type of audio signal is in use.

•MODE FAMILY identifies the currently selected mode family.

•MODE identifies the currently selected listening mode.

Note: The Audio line is dashed out if the audio input is analog.

VIDEO STATUS

protected inputs can restrict the component output format options.

• COMPONENT OUT identifies the currently selected

component output status as described below.

• S-VIDEO OUT identifies the currently selected S-video output

status as described below.

• COMPOSITE OUT identifies the currently selected composite

output status as described below.

The Component, S-Video, and Composite Out parameters all reflect the interaction between the input type (which is not listed in the Video Status menu), the copy protection status, the video process parameter setting, and the current output resolution.

Therefore...

VIDEO STATUS

VIDEO STATUS

INPUT RESOL: - - -

COPY PROTECTION: OFF

V-PROCESS: FAROUDJA

OUTPUT RESOL: - - -

COMPONENT OUT: 480i

S-VIDEO OUT: OFF

COMPOSITE OUT: OFF

• COMPONENT OUT displays “OFF” if the component output is

disabled for the current video input and processing

configuration. Otherwise, it displays “Enabled”.

• S-VIDEO OUT displays “OFF’ if the S-video output is disabled

for the current video input and processing configuration.

Otherwise, it displays the current output resolution.

• COMPOSITE OUT displays “OFF’ if the composite output is

disabled for the current video input and processing

configuration. Otherwise, it displays the current output

resolution.

The VIDEO STATUS menu is an information-only menu identifying the current video status of the RV-5.

4-4