Panasonic TC 26LX600 Operating Peripheral Equipment, To find a code not listed in the code list

Operating Peripheral Equipment

You can operate other manufacturers’ equipments using this TV’s remote control.

1	Connect the external equipments to the TV and
	Power Off the external equipments
2	+	Press both buttons simultaneously
		for more than 3 seconds.
		Release the buttons when the equipment selection
		•buttons start flashing.

3

4

5

Select the equipment

with the equipment selection button

•Thelit). selected button remains lit (other buttons are not

Input the equipment’s 4-digit remote control code (p. 37-38)

Operate the equipment with the remote control (p. 36)

•The external equipment turns On.

■If the equipment does not operate with remote control

•When your equipment has a single code

Input the remote control code again

•When your equipment has multiple codes

Change the code with above and test again

Caution

•Registration will fail if the wrong code is input or it takes more than 30 seconds to register.

To find a code not listed in the code list

This procedure searches all codes and is called the “sequence method.”

After step above, change the code and test

change

Operate the equipment with the remote control (p. 36)

•Repeat until the code is found

•It may take many attempts before the correct code is found

20

When the correct code is found

store