Lexicon RV Receiver manual Tuner Controls, Am/Fm, St/Mon, Auto/Man, Preset +

RV-5 Tuner, PC, & Dock Controls

Note: The Tuner Input setup displays Digital Audio as NONE, Analog Audio as TUNER, and the Dig/Anlg Auto parameter is dashed out. These three parameters cannot be changed for the Tuner Input.

Once the Tuner is activated, the TUNER input button under the Main Zone heading on the front panel is lit with a blue LED; the Zone 2 TUNER input button lights with an amber LED. The front panel of the RV-5 and the 2-line OSD display TUNER and the current listening mode on the left side of the display; and the currently selected band frequency, preset location, and volume on the right side.

TUNER FM 87.50 01

LOGIC 7 7CH MU -32dB

TUNER CONTROLS

The front panel controls, the first page of the Tuner remote touch screen menu, and the third page of the Zone 2 remote touch screen menu provide identical controls for the AM/FM radio tuner.

AM/FM

Selects the frequency band that the tuner will play. This button toggles between AM and FM.

ST/MON

Toggles between FM Stereo and Monaural reception. The first press displays the current state and the second press changes the setting.

Note: This button also controls FM muting of weak signals. In Stereo mode, very weak signals, or FM static when a signal isn’t present, are muted. In Monaural mode, no muting is applied, so very weak signals and FM static are audible.

AUTO/MAN

Controls how scrolling through the frequencies is managed. The button toggles between Automatic (AUTO) and Manual (MAN) tuning. The first press displays the current state, “AUTO” or “MANUAL”, and the second press changes the setting.

AUTO automatically seeks out the next available station when a TUNE button is pressed; MANUAL only scrolls when the user presses a TUNE button.

If AUTO is selected, then pressing a TUNE button once will start the automatic scrolling. Pressing a TUNE button again stops the scrolling process. If MAN is selected, when either the Tune + or Tune - button is pressed and held down, the frequencies can be scrolled through faster.

TUNE +/-

Use the Tune + or Tune - controls to select a frequency. Pressing either the Tune + or Tune - button enables the user to scroll through the frequencies. The FM band scrolls in 0.1 MHz increments; the AM band scrolls in 10 kHz increments. The Auto/Man setting affects this function.

PRESET +/-

Use the Preset + or Preset - controls to select a previously saved radio station. Radio stations saved to a preset are displayed to the left of the associated preset number. There are 30 Presets available for the Tuner.

To select the preset location of a previously saved radio station, simply scroll through the Presets until you reach the desired Preset number. The tuner will automatically switch to play the selected preset radio station. Holding one of the buttons down scrolls through the preset locations until the button is no longer being pressed.

5-3