Lexicon RV Receiver manual Input Setup, Name

Setup Lexicon

INPUT SETUP

Selecting the SETUP menu INPUT SETUP option opens the INPUT SETUP menu, a two-screen menu which sets up the input type and name, the digital and analog inputs for both audio and video, the listening mode, and other advanced input settings.

MAIN MENU

AUDIO CONTROLS VIDEO CONTROLS

SETUP

SETUP

DISPLAY SETUP SPEAKER/EQ SETUP

INPUT SETUP

SURROUND CONFIG DOLBY CONFIG MUTE LEVELS POWER ON SETTINGS

INPUT SETUP 1

INPUT: HD

NAME: ________

VIDEO IN: HDMI 1

V-PROCESS: FAROUDJA

VIDEO OUT: AUTO

DIG AUDIO: HDMI 1

ANLG AUDIO: NONE

DIG/ANLG AUTO: ON

INPUT SETUP 2

MODE FAMILY: STEREO

MODE: 2-CHANNEL

DEFAULT SUR: USE LAST

A/D SAMPLE RATE: 48kHz

A/V SYNC DELAY: 0 ms

ADVANCED VIDEO

TRIGGER 2: ON

ZONE-2 OUT: ANALOG

ADVANCED VIDEO 1

INPUT TYPE: VCR

SHARPNESS: 32

NOISE REDUCTION: ON

X-COLOR SUPPRESS: ON

DCDi INTERPOL: ON

FILM DETECTION: ON

FILM EDIT DETECT: ON

ADVANCED VIDEO 2

FLESHTONE NR: ON

COMPNT ENHANCE: ON

BRIGHTNESS: 100

CONTRAST: 100

COLOR: 100

INPUT

SETUP

INPUT SETUP INPUT

information on these three inputs, refer to Section 5: Tuner, PC, & Dock Controls.

Selects between the twelve different inputs available. The input selected in this parameter identifies the input that is currently being setup or modified. Inputs can be scrolled through and modified without leaving the input setup menu. However, most input setup changes do not take affect until after the OSD menu is exited.

Note: Selecting a different input in the input setup menu will also change the front panel input selection to match. For example, if the Tuner is selected on the front panel and you change the Input parameter to HD, the front panel HD input is also selected.

Most of the inputs are interchangeable, with the exception of the Dock, PC, and Tuner inputs. These three inputs are “hard-wired” and do not allow for user selection of the Audio In parameters. For more

Note: When a source is active, changing some audio or video parameters may cause the Main Zone audio to briefly mute the incoming source. If Zone 2 is set to DOWN MIX, the Zone 2 audio will also briefly mute.

NAME

SETUP INPUT SETUP NAME

Allows the user to customize the name of the selected input. Custom input names can include up to eight characters.

Note: A custom name cannot be assigned to the Tuner input.

3-14